מתג Luminex 01 00052-POE Gigacore 26i with PoE

27605
עמוד הבית » מוצרים » מתג Luminex 01 00052-POE Gigacore 26i with PoE

ה- GigaCore 26i הינו מתג אינטרנט מקצועי וורסטילי מבית Luminex הנועד להתמודד עם הדרישות המשתנות של עולם התאורה, הוידיאו והסאונד בדרך ידידותית וקלה למשתמש. המתג מכיל 24 מחברי shielded Neutrik Ethercon Gigabit, 6 חיבורי SFP לחיבור כבלים אופטיים ותוכנת WEB לקינפוג אופציות שונות. המתג תומך במגוון פרוטוקולים:
PoE עד W300
Dante
Ethersound
REAC
sACN
ArtNet
MANet2
IEEE 802.1p CoS (Class of Service)
DiffServ (DSCP)
IEEE 1588 PTP V2

פרטים טכניים נוספים:

Connectivity

Network: 24 x 10/100/1000Mbps shielded copper RJ-45 connectors
(including ports 21-24 as shared media)
6 x SFP cages, compliant with 10/100/1000Mbps Mini GBIC transceiver
(including ports 21-24 as shared media)
1 x serial RJ45 console port
Power: 1 x IEC inlet

Switch Features

Functionalities RLinkX
Groups
PoE (26i with PoE only)
Profile Manager
Controlled fans
Ethernet Compliance: IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet
Supported Protocols: AES67, Art-Net, Dante©, Ethersound©, MANet1&2©, Q-Lan©, REAC©, sACN, and many more !
IEEE 802.1p CoS (Class of Service)
QoS (DSCP)
PoE+ 802.3at (GigaCore 26i with PoE only)
Sound Protocol Compliance: Yes, low jitter
Ethernet Switch Type: Layer 2/3 – Full non blocking wire-speed switching performance
Memory: 4Mb
MAC Address Table: 8192 Entries
Address Learning / Aging: Self learning, Auto aging
Switching Throughput: 52Gbps
IGMP support: Yes (V1/V2/V3)
IGMP Snooping: Yes (default : enabled)
PoE output (26i with PoE only): Max 370W to share on all RJ45 ports

Port Features

Port Sensing: Auto negotiation
Port Speed: Copper: 10/100/1000T
Fiber: 100/1000BaseX
Auto Crossover: MDI / MDIX (allow to use straight or cross wired cable)
Auto Sensing: Full or Half Duplex (Gigabit is Full Duplex)
PoE support (26i with PoE only) Yes, PoE+ compliant (max. 30W per port)

Status Report

Ethernet Port Connection: Status available throught the mode button and mode LEDs:
White LED: Groups assignation
Blue LED: RlinkX status
Yellow LED: PoE status (26i with PoE only)
Off: Dark mode
Ethernet Port Speed: Status available through port speed LED:
Orange: 100Mbps link
Green: 1000Mbps link
Device (Ok): Status LED (Green / Red LED)
PoE (GigaCore 26i with PoE only): Status LED (Green / Orange / Red LED)
RLinkX: Status LED (Green)
Power: Status LED (Green / Orange / Red LED)

Management

Configuration: Through the built-in web server

Power Input

Power Input: 100-240VA
50-60Hz
0,5 – 0,29A for GigaCore 26i
4,9 – 2,2A for GigaCore 26i with PoE
Backup Power Input: +12VDC – 2,5A on Molex 14 pins connector
Backup PoE Input: -54VDC – 6,5A on Molex 14 pins connector
Power Consumption: GigaCore 26i: Maximum 30W
GigaCore 26i with PoE: Maximum 430W

Environmental

Operating Temperature: GigaCore 26i: 0 to +50 °C
GigaCore 26i with PoE: 0 to +40 °C
Storage Temperature: -10 to +70 °C
Humidity (non condensing): 5 to 95 % RH

Physical

Enclosure: Metal housing
Dimensions (W x D x H): 482 x 270,3 x 44 mm
19" x 10,64" x 1.73"
Packaging: 547x 425 x 80 mm
21,53" x 16,73" x 3,14"
Weight GigaCore 26i: 3.5Kg
GigaCore 26i with PoE: 4Kg

Additional informations

Approvals: CE, IEC 60950-1, EN 60950-1, UL 60950-1
CAN/CSA-C22.2 No.60950-1
FCC Part 15, CFR 47, Class A
CAN/ICES-003(A), EN55022 (CISPR22), EN5024 (CISPR24)
RoHS Compliance
Order Reference: GigaCore 26i: LU01 00052
GigaCore 26i with PoE: LU01 00052-POE
Note: Luminex LCE operates a policy of continuous development.
Luminex LCE reserves the right to make changes and improvements
to any of the products described in this document above without prior notice.
Specifications are subject to change without notice.